PDF report
Layouts and Groups
Layouts
|
||
If the Layouts checkbox is checked, then information about layouts will be included in the report.
If the Drawing checkbox is checked, then drawings of layouts with horizontal projections of camera view areas will be included in the report.
Height and width of the drawings in % of the height and width of the page.
You can outline the drawings by a frame and set the color of the frame.
Set special (enlarged) size for page with layout drawings. On the page of increased size, you can place a more detailed drawing.
Rotate the page with the drawing on 90 degrees.
Special drawing page sizes in centimeters or inches.
Layout drawings are stored in * .png format in the specified directory. When creating the PDF report, VideoCAD takes Layout drawings from this directory. You can create / update the drawings in automatic or semi-automatic modes, edit, delete, replace drawings before creating the report.
When replacing or editing can not change names of image files.
Start creating / updating layout drawings in the Drawings Directory. Layout drawings are generated based on images in the Graphics window. But resolution of the drawings may exceed screen resolution of Windows. The resolution of the drawings when generating is calculated from the page size (taking into account the special page size), height and width of the drawing, as well as the specified Resolution of the document. If the resolution of the drawings is too large, then the lines in the pictures become poorly distinguishable, and the texts are poorly readable.
If the resolution is too small, then the drawings contain fewer details than they could and the pixel structure of the images is viewed.
Enable manual adjustments when creating layout drawings. Before saving each drawing, VideoCAD suggests correcting its scale and position in the red frame using the mouse. For precise scaling, hold Ctrl. To save the drawing, press Enter, to go to the next layout, press Space bar.
Instead of automatically selecting the position and scale of the drawing, show drawings within the boundaries selected in previous generations of drawings of these layouts.
In the box, you can set a factor of expansion of the drawing boundaries beyond the extreme objects when automatic selection of position and scale of the drawing.
When automatically selecting position and scale of the drawing, consider only cameras and do not take into account constructions.