PDF report
Cameras
Camera Models
Table
|
||
On the tab, you can configure printing of the table with parameters of models of all cameras included in the report. The table uses border thicknesses and fonts set on the Parameters tab.
Print the Table of camera models.
The table can be horizontal (parameters of each camera model are arranged horizontally) or vertical (parameters of each camera model are arranged vertically).
A horizontal table allows to display unlimited number of camera models with a small number of parameters. A vertical table allows to display unlimited number of parameters with a small number of camera models.
Print caption near the table.
The X coordinate of the left edge of the table. If the Center checkbox is checked, the table will be centered horizontally.
This parameter is relevant only for vertical tables. A horizontal table is always stretched to the full width of the page.
On the panel you can change the color of borders and background colors of table sections. If the Zebra checkbox is checked, then the value area is colored alternately.
Widths of columns (%) divided by vertical lines
In the box you can specify the widths of the columns (subheadings) of a vertical table starting from the left column. Widths are specified in % of the page width, separated by vertical lines.
For example: 10|20|15|5.
It is not necessary to set widths for all columns. The last width in the row will affect all remaining columns on the right.
If the table does not fit the width of the page, then all columns will be compressed.
If the widths of columns are not specified, VideoCAD will set them by default.
Setting column widths by the string affects a vertical table only. The widths of columns of a horizontal table are set together with the list and location of the columns (parameters) in the View from the Table of Camera Models window.
Filtering and sorting camera model parameters
To select and sort parameters that should be included in the Table of Camera Models in PDF Report:
• | open the Table of camera models window; |
• | adjust visibility, order and width of displayed columns. After finishing adjusting, only columns with parameters that should be included in the Table of Camera Models in PDF report should be visible in the Table of camera models window. The Columns must be in the desired order. Column widths should be sufficient to display all headers; |
• | save the column configuration of the Table of camera models to a View; |
• | close the Table of camera models window; |
• | Select the saved View from the View from the Table of camera models combobox. |
Set special (enlarged) size for page with the Table. On the page of increased size, you can place a more detailed table.
Rotate the page with the table on 90 degrees.
Special page sizes in centimeters or inches.