Cut, Copy & Paste between layers

Post Reply
neverland
Posts: 5
Joined: 12 Feb 2010, 04:11

Cut, Copy & Paste between layers

Post by neverland »

Hi,

Just an enquiry.

I understood that it is possible to cut, copy and paste cameras between layers. But what about cut, copy and paste cameras between layers while retaining their camera names?


Thanks

Support
Posts: 204
Joined: 07 May 2008, 08:53
Location: Russia
Contact:

Re: Cut, Copy & Paste between layers

Post by Support »

When you paste copied cameras, new cameras will be created and the New camera box appears. In the New camera box you can enter any name including name coincided with the name of copied camera.

Try also the Numerate cameras tool. Menu>Camera>Numerate cameras. Using this tool you can rename several cameras sequentially according to adjustable pattern.

Support
Posts: 204
Joined: 07 May 2008, 08:53
Location: Russia
Contact:

Re: Cut, Copy & Paste between layers

Post by Support »

How to copy constructions and 3D models to another project
• Select and copy the objects you need to copy.
• From the same instance of VideoCAD, open the destination project or create a new project.
• VideoCAD internal clipboard content will be maintained.
• Once the destination project is opened, paste the copied contents.

Post Reply