Page 1 of 1

"Linking" cameras with multiple sensors

Posted: 15 Sep 2016, 19:46
by TFen
Is there a way to link or group cameras that have multiple sensors in one enclosure? For example: http://avigilon.com/products/video-surv ... or-camera/
I want to move them all at the same time, not one at a time.

Re: "Linking" cameras with multiple sensors

Posted: 16 Sep 2016, 05:30
by Support
Multisensor cameras are sets of usual cameras in fact. To model them you can create several cameras at one place. Copy and paste cameras to the same place.

You can move/rotate (in horizontal plane)/copy/change view area view of the group of cameras at the same time. Just select them by the Selection window, not by clicking. See Edit button group>Select/Edit
Image

To activate separated cameras at one point use the Active camera combo-box on the Toolbar.
Image

To model images from multisensor cameras the Monitor window is useful.
Image

Re: "Linking" cameras with multiple sensors

Posted: 22 Sep 2016, 19:55
by TFen
That works, but it breaks "Numerate cameras" since it sees each head as an individual camera.

Re: "Linking" cameras with multiple sensors

Posted: 23 Sep 2016, 08:07
by Support
TFen wrote:That works, but it breaks "Numerate cameras" since it sees each head as an individual camera.
"Numerate cameras" is flexible tool. You can numerate selected groups of cameras only, can correct results of automatic numeration. For example, you can select all cameras on the layout, then unselect cameras which are parts of multisensors cameras (Cam X.2, CamX,3, CamX.4, except CamX.1). Then check Selected only, then click Numerate. Then select each multisensor camera and numerate it individually. Or numerate cameras manually.

Image

Thus, VideoCAD8 has not special tools for multisensor cameras, but available universal tools allow to model them. VideoCAD9 will have special tools in addition.

Re: "Linking" cameras with multiple sensors

Posted: 31 Mar 2019, 05:15
by Support
VideoCAD9 has new tools for modeling multisensor cameras.

Modeling multisensor camera

Image

Image

Please see What is new in VideoCAD

Re: "Linking" cameras with multiple sensors

Posted: 22 Jan 2021, 12:28
by Support
In VideoCAD 10 Multi-sensors cameras with linked modules and matrix multisensor cameras can be simulated.

Image