CCTV Camera Database in VideoCAD ( Pelco IPSXME-136-7X)

CCTV Camera Database in VideoCAD ( Pelco IPSXME-136-7X)

Postby Ananthram » 08 Nov 2017, 16:22

We are a telecom FEED and Integrator in Oman. In one of our project having part of CCTV Coverage Study in 3D modeling where the client had given PDMS file in .nwd format and the model of the camera is Pelco IPSXME-136-7X. By default, this model database is not available in your CCTV Video CAD software.

We have tried with the product vendor to get this model database file to upload in CCTV Video CAD software, but they are not aware about this database and asked us to get it from JVSG.Com

Also for 3D modeling design, in your software no option provided to feed these detail by manually.

We are helpless, please suggest and support.

Thank & Regards,

Ananthram
+968 92929712
Ananthram
 
Posts: 1
Joined: 08 Nov 2017, 16:13

Re: CCTV Camera Pelco IPSXME-136-7X Database

Postby Support » 10 Nov 2017, 08:51

VideoCAD does not support a "Database of all cameras of the World" because we consider it is a senseless marketing tool. This database has only marketing purpose to attract unskilled persons who trust in a "database of all cameras" and "possibility of quality intuitive CCTV design without knowledge".

In the existing "Database of all cameras of the World" only four camera parameters are modeled. They are copied from manufacturer's specifications:

1. Lens focal length.
2. Image sensor format (not sensor actual size!).
3. Number of pixels.
4. Aspect ratio

Other camera parameters (light sensitivity, lens distortion, frame rates etc.) do not represent in such databases or their values are wrong or incomplete. Moreover other parameters can not be modeled by other CCTV design software except VideoCAD Professional.

At the same time, size (and aspect ratio) of active area of image sensor and number of pixels can be different in different modes of the same camera. The same camera can have different lenses. Frequently one camera model has many modifications with different image sensors (different sizes, different numbers of pixels, light sensitivity...). Parameters of these modifications differ significantly.
Lens distortion, lens resolution, light sensitivity and many other important parameters are not represented in manufacturer's specification or their values are wrong and overstated.

Such database ignores many features of a camera important for specific tasks. You can find description of them only in manufacturer's specifications. In real camera modeling such database brings a lot of errors. In many cases loading a camera data from the database will produce wrong result of modeling.

Such database could have a value only in case of laboratory testing all models in the database taking into account all camera modes. But it is very complicated. We tested cameras in our lab in the past and offer special tool for testing. Nobody tests all cameras.

Without testing it is a profanation. This profanation is convenient for camera sellers and irresponsible CCTV design software developer therefore it is widely advertised and intruded.

But VideoCAD is a serious tool and does not support profanations.

Therefore VideoCAD supports a camera database (with tens of realy modellable parameters!) but offers the customers to fill it independently, with understanding, taking into account actual setting of the camera in the project.

You need not the "Database of all cameras of the World" to model cameras in VideoCAD. If you copy from the camera manufacturer's specification only four parameters:

1. lens focal length (2.8mm,4mm, 6mm etc. ).
2. image sensor format (1/3", 1/2" etc.)
3. number of pixels on horizontal and vertical (1280*720,1280*960, 1920*1080 etc.)
4. aspect ratio (4:3, 16:9, 19:10 etc.)
- you will get the same result as from such database, but taking into account actual camera mode and you will avoid errors of the database. To model varifocal and ZOOM lenses you may enter Min and Max lens focal lengths.
You must know these parameters of cameras. You can read about them in VideoCAD Help
Lens focal length, Image sensor format, Aspect ratio
Number of pixels

With VideoCAD you can model much more camera parameters according to your need, including parameters absent in manufacturer's specification; Even the four basic parameters of cameras can be modeled more accurately. But you need better understanding. You must understand camera parameters and be able to read camera manufacturer's specification. Understanding is the first that you need for quality CCTV design. Your project is only your responsibility as well as design tools and cameras you choose.

Ananthram wrote:Also for 3D modeling design, in your software no option provided to feed these detail by manually.


Please see Table of Camera Models in the Help system
Support
 
Posts: 136
Joined: 07 May 2008, 08:53
Location: Russia


Return to CCTV design with VideoCAD

Who is online

Users browsing this forum: No registered users and 1 guest

cron